RTM Composites » Products https://91k.887.mywebsitetransfer.com RTM Equipment and Accessories Since 1990 Tue, 27 Apr 2021 17:21:40 +0000 en-US hourly 1 https://wordpress.org/?v=3.9.40 10mm x 5mm Profile https://91k.887.mywebsitetransfer.com/store/0002-10mm-x-5mm-profile https://91k.887.mywebsitetransfer.com/store/0002-10mm-x-5mm-profile#comments Thu, 29 May 2014 18:24:08 +0000 https://www.rtmcomposites.com/?post_type=product&p=1094 10mm x 5mm Groove profile for Mushroom Seal.

The post 10mm x 5mm Profile appeared first on RTM Composites.

]]> The post 10mm x 5mm Profile appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/0002-10mm-x-5mm-profile/feed 0 Dynamic Seal https://91k.887.mywebsitetransfer.com/store/1114-dynamic-seal https://91k.887.mywebsitetransfer.com/store/1114-dynamic-seal#comments Sat, 26 Apr 2014 02:10:48 +0000 https://www.rtmcomposites.com/?post_type=product&p=986 Dynamic seal is 100% silicone material suited for all types of resin systems. Versatile and flexible in nature allowing it to conform to changing mold flange profiles.

Dynamic seals primary use is to circumvent the mold cavity acting as the main seal, restricting the resin from leaving the mold cavity during injection.

The post Dynamic Seal appeared first on RTM Composites.

]]> Dynamic seal is 100% silicone material suited for all types of resin systems. Versatile and flexible in nature allowing it to conform to changing mold flange profiles. Dynamic seals primary use is to circumvent the mold cavity acting as the main seal, restricting the resin from leaving the mold cavity during injection.

Dynamic seal relies on a .450″ deep by .550″ wide channel to properly seal the mold cavity. The seal channel can be manually cut into the mold, or we offer a dynamic seal channel profile to precisely create a tapered profile channel.

Installation:

Installation of the dynamic seal onto the mold surface is done using 100% RTV silicone—part number 7499. Place a thin coat of 100% RTV silicone on the base of the seal, careful to not put too much as it will raise the seal interfering with mold closure. Join the ends with using the silicone as an adhesive and a dynamic seal splice join to ensure a secure fit. Once installed and dried, a small bead of silicone is suggested along the edge of the mold cavity side to prevent resin from pushing in between the seal and the seal channel wall.

Temperature Note:

Maximum mold temperature for the dynamic seal is 170f / 76c

The post Dynamic Seal appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/1114-dynamic-seal/feed 0 Dynamic Seal Channel Profile https://91k.887.mywebsitetransfer.com/store/3340-dynamic-seal-channel-profile https://91k.887.mywebsitetransfer.com/store/3340-dynamic-seal-channel-profile#comments Sat, 26 Apr 2014 02:21:05 +0000 https://www.rtmcomposites.com/?post_type=product&p=990 Dynamic Seal Channel Profile is designed to create a precise seal channel for the Dynamic seal. Eliminating the need to manually create a seal channel from wax other other material.

The post Dynamic Seal Channel Profile appeared first on RTM Composites.

]]> Dynamic Seal Channel Profile provides rapid calibration during your mold making process. Designed to create a precise seal channel for the Dynamic seal, the Dynamic Seal Channel Profile saves on labor costs by eliminating the need to manually create a channel via wax or other material.

Installation:

Installation of the Dynamic Seal Channel Profile is by placing the seal profile around the molds perimeter flange, on 1mm thick sheetwax, using a super glue adhesive to bond the seal profile to the sheetwax. The 1mm of sheetwax ensures the ideal depth for the Dynamic Seal to properly compress and seal when the mold is fully closed.

The post Dynamic Seal Channel Profile appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/3340-dynamic-seal-channel-profile/feed 0 Dynamic Seal Splice https://91k.887.mywebsitetransfer.com/store/1126-dynamic-seal-splice https://91k.887.mywebsitetransfer.com/store/1126-dynamic-seal-splice#comments Thu, 29 May 2014 19:23:13 +0000 https://www.rtmcomposites.com/?post_type=product&p=1114 Dynamic Seal Splice cut to length

The post Dynamic Seal Splice appeared first on RTM Composites.

]]> The post Dynamic Seal Splice appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/1126-dynamic-seal-splice/feed 0 Mushroom Seal https://91k.887.mywebsitetransfer.com/store/3202-mushroom-seal https://91k.887.mywebsitetransfer.com/store/3202-mushroom-seal#comments Sat, 26 Apr 2014 02:07:42 +0000 https://www.rtmcomposites.com/?post_type=product&p=984 The post Mushroom Seal appeared first on RTM Composites.

]]> The post Mushroom Seal appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/3202-mushroom-seal/feed 0 Red Silicone High Temp Mushroom Seal https://91k.887.mywebsitetransfer.com/store/8095-red-silicone-high-temp-mushroom-seal https://91k.887.mywebsitetransfer.com/store/8095-red-silicone-high-temp-mushroom-seal#comments Thu, 29 May 2014 19:31:58 +0000 https://www.rtmcomposites.com/?post_type=product&p=1118 Red Silicone High Temp Mushroom Seal.

The post Red Silicone High Temp Mushroom Seal appeared first on RTM Composites.

]]> The post Red Silicone High Temp Mushroom Seal appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/8095-red-silicone-high-temp-mushroom-seal/feed 0 Resin Channel Profile https://91k.887.mywebsitetransfer.com/store/7329-resin-channel-profile https://91k.887.mywebsitetransfer.com/store/7329-resin-channel-profile#comments Thu, 29 May 2014 19:10:44 +0000 https://www.rtmcomposites.com/?post_type=product&p=1105 Resin Channel Groove Profile.

The post Resin Channel Profile appeared first on RTM Composites.

]]> The post Resin Channel Profile appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/7329-resin-channel-profile/feed 0 Vacuum Wing Seal https://91k.887.mywebsitetransfer.com/store/1680-vacuum-wing-seal https://91k.887.mywebsitetransfer.com/store/1680-vacuum-wing-seal#comments Sat, 26 Apr 2014 02:04:27 +0000 https://www.rtmcomposites.com/?post_type=product&p=982 Outer perimeter Wing Seal used to seal outer edge of mold. Normally used at the outer edge of the mold as the atmospheric seal on a LRTM mold. Can be ordered by the foot or for the best value in 100 foot rolls for roll pricing order 1-1680RL.

The post Vacuum Wing Seal appeared first on RTM Composites.

]]> The post Vacuum Wing Seal appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/1680-vacuum-wing-seal/feed 0 Wing Seal Profile https://91k.887.mywebsitetransfer.com/store/3391rl-wing-seal-profile https://91k.887.mywebsitetransfer.com/store/3391rl-wing-seal-profile#comments Thu, 29 May 2014 23:07:23 +0000 https://www.rtmcomposites.com/?post_type=product&p=1104 Wing Seal Groove Profile for 1680 Seal - per 25' roll

The post Wing Seal Profile appeared first on RTM Composites.

]]> The post Wing Seal Profile appeared first on RTM Composites.

]]> https://91k.887.mywebsitetransfer.com/store/3391rl-wing-seal-profile/feed 0